Na zalogi: 2
| 2kos | 10% | 15,21 €/kos |
| 3kos+ | 15% | 14,36 €/kos |
SetTech-Protect Easy Set Foil & Glass Fit+ 4-in-1It is comprehensive screen protection containing two types of protectors in one package. The set includes 2 hydrogel films with an installation frame and 2 tempered glass protectors—enough for long-term device protection.
Glass Fit+ tempered glass with a thickness of 0.3 mm and a hardness of 9H protects the display from scratches while maintaining full touchscreen sensitivity and crystal-clear transparency. The oleophobic coating effectively repels fingerprints and makes cleaning easier.
The Hydro Flex+ TPU hydrogel film perfectly conforms to the screen’s surface, including curved edges. It has self-healing properties—minor scratches that occur during use smooth out on their own. The film retains full optical clarity and touch sensitivity.
* Due to the varied edge milling of displays, after installing a protective film or glass, a delicate air halo may appear around the screen. This is natural and depends on the screen’s milling in the particular device.
2 × Tech-Protect Glass Fit+ kaljeno steklo
2 × Tech-Protect Hydro Flex+ hydrogel film
1 × Film mounting frame
2 × namestitveni komplet
Kaljeno steklo
1. Start the installation in the bathroom immediately after bathing—the water vapor will absorb all the dust from the air, so it won’t interfere with the installation.
2. Površino zaslona temeljito očistite in razmastite, nato pa jo s suho krpo spolirajte do sijaja.
3. Install the glass as evenly as possible – you can position it using the included installation tools.
4. Remove air bubbles by pressing the entire surface firmly in circular motions for several dozen seconds—do this so that the adhesive layer bonds to the screen as strongly as possible.
Hidrogelna folija
1. Begin the installation in the bathroom immediately after bathing—the water vapor will settle the dust floating in the air, so it won’t interfere during installation.
2. Place the phone in the special installation frame, making sure it is securely seated in it.
3. Thoroughly clean and degrease the screen surface using the included wipe, then polish it to a shine with a dry cloth. Make sure no dust particles or dirt remain on the screen.
4. Match the cutouts in the film to the tabs in the frame so that they interlock perfectly.
5. Pull the inner layer of the protective film from one side, pulling from the center outward. This will start the automatic application of the film to the screen.
6. Press the film down with a squeegee so that the adhesive layer bonds well to the screen surface.
7. Pull the inner film layer from the other side as well, pulling from the center outward, then press it down with a squeegee so that the adhesive layer bonds evenly to the screen across the entire surface.
8. Gently remove the outer protective film.
9. If air bubbles have appeared under the film, press the entire surface firmly in circular motions for several dozen seconds until they disappear—this will ensure the strongest possible bond between the adhesive layer and the screen.
Ali imate izkušnje s tem blagom? Pomagajte drugim pri izbiri.