Na zalogi: > 5
Zielony filament Creality Ender-PLA+ o średnicy 1,75 mm to ulepszona wersja klasycznego PLA, zaprojektowana do tworzenia trwałych i estetycznych wydruków. Materiał wyróżnia się zwiększoną odpornością na pękanie, stabilnym podawaniem oraz wysoką czystością surowca, co sprzyja równomiernemu wytłaczaniu podczas drukowania. Dzięki precyzyjnemu nawijaniu z wykorzystaniem technologii EPC oraz szerokiemu zakresowi parametrów pracy filament nadaje się zarówno do codziennego drukowania, jak i bardziej wymagających projektów na drukarkach 3D FDM.
Die PLA+-Formel wurde entwickelt, um die Rissbeständigkeit des Materials im Vergleich zu Standard-PLA zu erhöhen. Das Filament hält Biegungen und mechanischen Belastungen besser stand und eignet sich daher besonders für die Herstellung funktionaler Teile, Prototypen und Modelle, die eine höhere Haltbarkeit erfordern.
Thanks to the high purity of the raw materials used and the reduced amount of impurities, the filament ensures even extrusion of the material. This helps minimize the risk of disruptions during printing and makes it easier to achieve consistent results across subsequent prints. Creality Ender-PLA+ has been tested with Creality printers to ensure optimal compatibility. At the same time, the filament is compatible with most FDM 3D printers that support 1.75 mm PLA+ filament, making it suitable for use in many third-party devices as well.
Die Filamentspule wurde mithilfe der EPC-Technologie präzise gewickelt, wodurch das Material ordentlich auf der Spule angeordnet ist und gleichmäßig in den Extruder eingeführt wird. Die sorgfältige Anordnung der Windungen trägt dazu bei, das Risiko eines Verhedderns des Filaments zu verringern, und sorgt für höheren Komfort bei langen Druckvorgängen. Das Filament ermöglicht die Anpassung der Einstellungen an verschiedene Druckermodelle und Projekte. Die empfohlene Düsentemperatur liegt zwischen 190 °C und 230 °C, die Bauplattentemperatur zwischen 25 °C und 60 °C, und die empfohlene Druckgeschwindigkeit beträgt 30 bis 600 mm/s.
| Proizvajalec | Creality |
|---|---|
| Model | Ender-PLA+ |
| Vrsta filamenta | PLA+ |
| Premer filamenta | 1,75 mm |
| Barva | zielony |
| Teža | 1000 g (1 kg) |
| Please specify the source and target languages. | Imprimantes 3D FDM compatibles avec du filament de 1,75 mm |
| Temperatura de impresión recomendada | 190-230°C |
| Herafoits soovituslik temperatuur | 25–60°C |
| Priporočena hitrost tiskanja | 30–600 mm/с |
| Tecnología de bobinado | EPC |
Ali imate izkušnje s tem blagom? Pomagajte drugim pri izbiri.